Starting Voltage: DC9-16V /DC20-28V

Working Voltage: DC9-28V/DC20-28V

Cool Start Current: Li<10A (DC=12/24V)

Output Power: 35W/55W

Output Frequency: 280Hz

Output Voltage: 85V (Rectangular Square Wave)

Working Temperature: -40—105℃

protection function

1. overpressure protection

In order to prevent burning lamp and let the owner found timely vehicle fault in the voltage is too high, when the power supply DC voltage exceeds 18V,Stabilizer stop working automatically, protect the ballast, avoid HID lamp damage.

2. Undervoltage protection

In order to prevent the light bulb will car battery power runs out, causing the vehicle can not be normally started, when the power supply of DC voltage is lower than 8V, stabilizer stop working automatically, avoid damage.

3. No load protection

When stabilizer not lighting, at no load condition, stabilizer stop working automatically, avoid high voltage electrical injury staff.

4. Short circuit protection.

When stabilizer in case of unexpected circumstances, is in short circuit condition, stabilizer stop working automatically, avoid damage.

5. Reverse connection protection

When stabilizer in the installation, operation of human error and make the input power is negative when anti access, stabilizer automatically stop working, ensuring stability device is not damaged.

6. Waterproof, dustproof, shockproof performance is good.